Cheerio Chaps!

Hi Bloggers.

I have a tag for you today which features the gorgeous Tarnished Gold CS Ultra Thick Embossing Crystals -

I started with my background card which was a piece of Milk Card with some mopped up waste Vintage Photo Distress Oxide Ink on it. I dusted with an Anti-Staic Pad and stamped the image from the Wendy Vecchi Studio 490 3 Cheers for Art Stamp Set using Clear Perfect Medium. I added CS Gold Detail Embossing Powder and heat set. I stamped sentiment from the Wendy Vecchi Studio 490 Parisian Art Stamp Set using Potting Soil Archival. I edged with Vintage Photo Distress Oxide using a Woodware Blend-It Tool.

I edged a Tag Toppers Art Part with Antique Gold Shimmer Paint. I then applied a good coating of Clear Perfect Medium on the top. I added CS Tarnished Gold Ultra Thick Embossing Crystals and set using a Low Speed Heat Tool. It's best only to do one coat to keep the definition of the mixed crystals.

I glued the topper to the tag using CS Glue. I trimmed the ends of my card in line with the top of the Tag Topper. I used my Crop-a-Dile to punch the hole in my tag through the Tag Topper and added some London Tan American Seam Binding.

I set the Efcolor Stove up and added some CS Clear and Tarnished Gold Ultra Thick Embossing Crystals to a Melt-It Case. I popped it onto the stove platform, added the lid and left to melt. Once moulten, I poured it into a mould that I made from Ranger Mold-n-Pour (I usually fill a few in a session). After a couple of minutes I removed my embellishment from the mould and added it to my tag using a little Hi-Tack Tape and a little CS Glue.

Thanks for stopping by.

Julia.
www.juliawattscrafts.co.uk

Classic and Intermediate Weaving dies together

Hi Bloggers.

Here's today's card -

For this one, I cut the Classic Weaving Die out of Milk Card twice and the Intermediate Weaving Die out of Sky Blue Card twice. The strips in the Intermediate die are half the width of the strips in the Classic Die so the Intermediate strips sit nicely in the centre of the Classic strips. I glued the blue intermeidate die cut on top of the milk one, leaving the ends of the card in place to make life easier. I cut one die cut down into strips and wove it through the other.

I made a frame out of Milk Card using dies #2 and #4 from Sue Wilson's Scalloped Lattice Frames Set B.I added it to my woven background using Woodware 2mm Foam Tape and trimmed away the excess. I matted onto Milk Card and then Sky Blue Card and finally another piece of Milk Card.

I cut the sentiment out of Sky Blue Card using Sue's Birthday Wishes Die Set and popped it onto a flag cut from Milk Card using Sue's Stitched Flags Die Set.

The foliage is cut using Sue's Spring Foliage Die Set. The flower is made using just the complete petal dies from Sue's Striped Nasturtium Die Set with a little flower added to the centre from the Spring Foliage Die Set.

I completed my card by adding a 3mm Cream Pearl to the centre of all the little flowers.


Thanks for stopping by.

Julia.
www.juliawattscrafts.co.uk

Season's Greetings with a bit of sparkle

Hi Bloggers.

Here's today's card -

For my background, I spread some CS Phill Martin Platinum Sparkle Texture Paste through The Snow is Falling Mask and put aside to dry (under and hour).

I cut both of the dies from Sue Wilson's Here Comes Santa Snow Globe Scene together out of Coconut White Card. I popped a piece of Double Sided Self Adhesive Sheet onto Coconut White Card and cut the outer die only from it. I trimmed away just a little from the edges, peeled away the backing and added my decorative die cut. I added Midnight Sparkle CS Glitterbitz to the exposed adhesive. I cut a Double Pierced Circle out of Black Card which was just large enough to pop out behind my santa piece.

I cut the sentiment from Lisa Horton's Stylish Script : Season's Greetings Die Set out of Coconut White and Black Card. I glued them together, offsetting them slightly to create a drop shadow.

Once my background was dry, I matted onto Black Card and then Coconut White Card I edged my background with CS Glue and added CS Crystal Stars Glitter Jewels.

Thanks for stopping by.

Julia.
www.juliawattscrafts.co.uk

Woven Background with some of Lisa Horton's Dies

Hi Bloggers.

I spent most of yesterday trying to fix some of the problems with my new website. Not completely there yet but I think I have made some progress and I've added a couple of new features. The prices are now displayed including VAT (yay!). There's now a Wishlist feature, you can request an email if a product comes back in stock and you can now purchase Gift Vouchers - tell your family about that one! I am still working on re-instating international shipping and the navigation is still an outstanding fix - it all takes time which is still in short supply this month.

I thought I'd share this card today for Helen who is a regular attendee of my local workshops -

For the weave, I cut the Sue Wilson's Intermediate Weaving Die out of Tan Card twice and the Striped Weaving Die out of Deep Blue Card twice. I glued one of the Deep Blue die cuts on top of one of the Tan ones at the ends only, offsetting them to fill in the gaps. I wove a tan strip from the Intermediate through my base and then a pair of strips from my blue strips. I repeated this pattern all the way across.

I made a frame out of Tan Card using dies #2 and #4 from Sue's Scalloped Lattice Frames Set B. I added it to my woven background using Woodware 2mm Foam Tape. I matted onto Deep Blue and then Tan Card.

I cut the reindeers out of Chestnut, Deep Blue, Rich Red, Black and Milk Card using Lisa Horton's Reindeer Pals Die Set.

I cut the sleigh and parcels out of Deep Blue and Tan Card using Lisa's Sleigh Die Set.

I cut the sentiment out of Rich Red Card using Lisa's Season's Greetings Die Set.

The winner of the card from Freebie Friday on 29th September is .................................
 

julsthomas

Please email me at juliawattscrafts@gmail.com with your address and I'll pop your card in the post.

Thanks for stopping by.

Julia.
www.juliawattscrafts.co.uk

Tag on a card with lovely Wendy Vecchi products

Hi Bloggers.

Had a brilliant time at my workshop yesterday. My next workshop is on October 15th in Sherringham with Sherringham Crafts, then the following Saturday in Lyndhurst with Emerald Crafts and my last one in October is on 28th when the lovely Leonie Pujol is coming over to Milton Keynes to join me. For the first 2, you need to contact the shops if you want to join in. For the one with Leonie, you can book here. Hurry though - only 5 spaces left!

Here's today's card -

I started by cutting a strip of Coconut White Card approx 3 1/8" wide by 6" in length to fit the width of the Wendy Vecchi Tag Toppers Art Part.

I swiped some Fired Brick Distress Oxide onto my Craft Sheet. I misted it with water and picked it up onto my card. I dried it and then inked all over with Spiced Marmalade Distress Oxide and added some Fired Brick Distress Oxide around the edges. Finally, I lightly went around the edges with Walnut Stain Distress Oxide.

I stamped the Crazy in Love text from the Wendy Vecchi Studio 490 3 Cheers for Art several times using Carnation Red Archival Ink from the Wendy Vecchi Mini Ink Pad Kit 1.

I covered a Tag Toppers Art Part and an Arty Hearts Pop-em with CS White Gesso. I then covered them with Fired Brick Distress Oxide. I edged them with Walnut Stain Oxide. I misted some water into my hand and clapped over them to create little splats. I blotted with Kitchen Roll.I stamped onto the Tag Toppers with a stamp from the 3 Cheers for Art Stamp set using Carnation Red Archival.

I added Clear Perfect Medium to the Art Part then Clear CS Ultra Thick Embossing Crystals and heat set using a Low Speed Heat Tool. I added some more ink and some more powder and heat set again. While still moulten, I sprinkled a little Tarnished Gold and Tropic Pearl CS Embossing Crystals and also a little CS Golden Sand Glitterbitz.

I stamped another stamp from the 3 Cheers for Art Stamp Set onto the Pop-em using Red Carnation Archival. I added Clear Perfect Medium, Clear CS Ultra Thick Embossing Crystals and heat set using a Low Speed Heat Tool. I added more ink and more powder, heat set and then sprinkled some Golden Sands Glitterbitz while still molten.

I set the Efcolor Stove up and added Clear and Blue Raspberry CS Ultra Thick Embossing Crystals to a Pie Case and added the lid. Once molten, I added it to a couple of moulds that I made during the shows I did last December. After a few minutes,I popped them out of their moulds. I added one to the Arty Hearts Pop-em.

I swiped some Spiced Marmalade Distress Oxide onto my Craft Sheet, misted it with water and picked it up onto another piece of card. I dried it and then repeated the process with Fired Brick. I cut a couple of leaves out of it using Sue Wilson's Spring Foliage Die Set and edged then with a little Walnut Stain Distress Oxide.

I cut the largest solid flower from Sue's Striped Nasturtium Die Set twice. I inked another piece of card with Fired Brick and cut the same sized open flower from the same die set twice. I glued them together, shaped them and added my other embellishment to the centre.

I swiped some Spiced Marmalade Distress Oxide onto my Craft Sheet, misted it with water and picked it up onto a piece of Blue White Ameerican Seam Binding. I dried it and then repeated the process with Fired Brick. I glued the Arty Hearts Pop-em and the Tag Topper Art Part to my tag. I trimmed my card to the shape of the tag using scissors. I used my Crop-a-dile to punch through the hole in the Art Part and through my card. I added my ribbon.

I decided to pop my tag onto a card. I embossed a piece of card using the Creative Expressions Brambled Rose Embossing Folder. I edged it with Fired Brick Distress Oxide using a Smoothie. I matted onto Antique Gold Pearl Card using CS Glue and then onto Coconut White Card using CE Mounting Cushion.

I completed my card by adding an 8mm White Pearl to each corner of my embossed background.

Thanks for stopping by.

Julia.
www.juliawattscrafts.co.uk

Glittered and Gilded Paper Cuts Noel Rudolf

Hi Bloggers.

I have my Christmas Workshop just outside Milton Keynes today. We're doing a Pick 'n' Mix format - could be complete chaos! Who knows? I'll try anything once!

Here's today's card -

Products used -
Paper Cuts - Noel Rudolf, Jingle Bells, Festive Cornucopia
Creative Expressions - Double Sided Self Adhesive Sheet, Ice Crystals Embossing Folder, Card : Coconut White, Antique Gold Pearl, Mounting Cushion
Cosmic Shimmer - Egyptian Gold Gilding Flakes, Frosted Crystals Glitter Jewels, Sparkle Star Diamond Frost, Clear Mirage Brilliant Sparkle Embossing Powder, Glue
Ranger - Clear Perfect Medium, Rubit Scrubit, Low Speed Heat Tool

I added a piece of DS Adhesive Sheet to Coconut White Card. I cut the circle die and the star corners from the Jingle Bells Die Set out of it.  I also cut the Noel Rudolf die from it.

I peeled away the backing on the Noel Rudolf and the Star Corners and added Sparkle Star Diamond Frost.

I added Egyptian Gold Gilding Flakes to the circle and the little stars, removing the excess with a piece of Rubit Scrubit.

I cut the scalloped circle die from the Festive Cornucopia Die Set out out Coconut White Card. I pressed Clear Perfect Medium in the edges, added Clear Mirage Embossing Powder and heat set using a Low Speed Heat Tool.

I added glue and CS Frosted Crystals around the edges of my gilded circle before adding my Rudolf piece. I also edged my embossed background with glue and Frosted Crystals Glitter Jewels.

Thanks for stopping by.

Julia.
www.juliawattscrafts.co.uk

Freebie Friday

Hi Bloggers.

Freebie Friday is back this week.

Here's today's card that is looking for a new home -

You can read how this card was made here.

Leave a lovely comment below to go into the draw to win it. I will announce the winner on Monday. Be sure to pop back to see if you have won.

Please note : Only comments left below will go into the draw. Comments made on the original post will not count. Information given on the original post was correct at the time that post was published.

Thanks for stopping by.

Julia.
www.juliawattscrafts.co.uk

Open Weave using the Intermediate Weaving Die

Hi Bloggers.

Great workshop up at CE HQ yesterday. My next workshop up there will probably be in November as October is pretty busy already. Over the next 2 days I'll be prepping and packing for my next workshop which is on Saturday located just outside Milton Keynes. We're operating a Pick 'n' Mix on this workshop where attendees choose up to 6 projects for a selection available. Bookings for this one close at 12noon tomorrow - you can book via my website here.

Here's today's card -

This card features an open weave using only the Intermediate Weaving Die. I cut it once out of Milk Card and twice out of Sky Blue Card. I left the Milk die cut completely intact and only cut the strips on one side of the Sky Blue one. Leaving one side of the Sky Blue one intact means that it's easy to keep even spacing. It takes almost one and a half of the die cuts to weave the full width.

I've embossed a piece of Milk Card using the CE Brambled Rose Embossing Folder. and glued my weave to it.

I added my frame cut from Milk Card using Sue's Scalloped Lattice Frames Set B using Woodware 2mm Foam Tape and trimmed away the excess. I matted onto Milk Card and then Sky Blue Card and finally another piece of Milk Card.

I added Sue's Thank You Die cut from Milk and Sky Blue Card.

The foliage is cut using Sue's Spring Foliage Die Set. The flowers are made using Sue's Striped Nasturtium Die Set with little flowers added to their centres from the Spring Foliage Die Set.

I completed my card by adding a 3mm Cream Pearl to the centre of my flowers.

Francoise Read has shows on Hochanda today at 7am, 11am and 3pm. I'm offering 10% discount on items on my website from the shows you can find them here. The discount is not automatic - enter FRANCOISE in the discount code box at checkout. There's a reminder of the code in the section header for the show products. Offer is valid for today only or while stocks last.

Thanks for stopping by.

Julia.
www.juliawattscrafts.co.uk

Parisian Art Tag

Hi Bloggers.

I'm up at Creative Expressions HQ today running a Christmas Stamping Workshop - lots of inky stampy fun!

Here's today's offering -

Products used -
Wendy Vecchi - Art Parts : The Guys and Tag Toppers, Studio 490 Parisian Art, Archival : Forget me Not and Watering Can
Distress Oxides - Broken China, Wilted Violet
Cosmic Shimmer White Gesso
Blue White American Seam Binding
Clear Perfect Medium
Cosmic Shimmer Clear Ultra Thick Embossing Crystals

Thanks for stopping by.

Julia.
www.juliawattscrafts.co.uk

Glitterbitz and Weaving

Hi Bloggers.

Here's today's card -

I made this card at Ally Pally - I love the Glitterbitz with the Classic Weaving Die.

I added a piece of CE Double Self Adhesive Sheet to a piece of Coconut White Card. I measured the amount needed to cut the Classic Weaving Die, removed the backing and added Silver Chrome CS Glitterbitz. I then cut the Classic Weaving Die from it.

I cut the Intermediate Weaving Die from Coconut White Card twice and glued the 2 die cuts together at the ends only, offsetting them to fill in the gaps. I then wove these through the Classic die cut in pairs - remember 2 x Intermediate =1 x Classic in width so this ia a quick weave.

I added a frame made from Coconut White Card using dies #2 and #4 from Sue's Scalloped Lattice Frame Die Set B and Woodware 2mm Foam Tape. I trimmed away the excess and matted onto Silver Shine Pearl Card cut using die #5 from the Scalloped Lattice Frame set and then onto another piece of Coconut White.

I cut the outer die from Sue's Here Comes Santa Die Set from the DS Adhesive on card and then both dies together our of Coconut White Card. I trimmed the edge all around the DS die cut to make life easier and peeled away the backing sheet. I added my decorative die cut and then Silver Chrome Glitterbitz.

I added some foliage cut from Coconut White and Silver Shine Pearl Card using Sue's Pine Twig and Berry Bough Die Sets. I added a poinsettia made using Sue's Classic Poinsettia Die Set. I popped some CS Glue in the centre and added Silver Chrome Glitterbitz.

Thanks for stopping by.

Julia.
www.juliawattscrafts.co.uk
Free card with all website orders over £10 (ask for one in the comments box at checkout).

Intermediate Weaving Die with Ribbon

Hi Bloggers.

Phew! That was a busy, tiring weekend. No rest today though as I need to get my website orders posted out and prep for my workshops on Wednesday and Saturday this week!

Here's today's card -

For this weave, I have cut Sue Wilson's Intermediate Die out of Coconut White Card once and threaded pieces of May Arts Two Tone Ribbon through it.

Products used -
Sue Wilson - Intermediate Weaving Die, Scalloped Lattice Frames Set B, Stitched Flags, Striped Nasturtium, Spring Foliage, Birthday Wishes
Card - Coconut White, Rich Plum
May Arts - Burgundy Two Tone Ribbon
Craft Consortium - Rhinestone Gem

Thanks for stopping by.

Julia.
www.juliawattscrafts.co.uk
Free card with all website orders over £10 (ask for one in the comments box at checkout).